Nitrile NBR Rubber Molded Parts

Nitrile Rubber by the total of acrylonitrile and butadiene polymerization, acrylonitrile content from 18% to 50%, the higher the acrylonitrile content of fossil fuel's resistance to hydrocarbon oil as possible
Chat Now

Product Details

Description

Nitrile Rubber by the total of acrylonitrile and butadiene polymerization, acrylonitrile content from 18% to 50%, the higher the acrylonitrile content of fossil fuel's resistance to hydrocarbon oil as possible, but the low temperature properties are changed poor, the general temperature range of -25 ~ 100 ℃. Nitrile rubber seal and the current O-ring one of the most commonly used rubber. Can be said is the most widely used, lowest-cost rubber seals.


Advantages:

• With good resistance to oil, water, solvent resistance and high voltage characteristics of the oil.

• With good compression distortion, wear and elongation strength.


Disadvantages:

• Not suitable for polar solvents being, such as ketones, ozone, nitro hydrocarbons, MEK and chloroform.

• For the production of fuel tank, oil tank and oil lines in hydraulic oil, gasoline, water, silicone grease, silicone, diester Department of lubricating oil, hydraulic oil, glycol systems used in the fluid medium rubber parts, especially seals parts.


1

23

Hot Tags: nitrile nbr rubber molded parts, china, manufacturers, suppliers, factory, customized, made in China

Inquiry

You Might Also Like