The rubber extrusion is a hot melt elastomer, and the plastic is hot melt and cold. Because of the different types of sulfides, rubber has a certain temperature range for molding, and it can even be changed by climate change. The temperature and humidity in the room will also be affected. Therefore, the production conditions of the shaped rubber extrusion parts processing parts need to be adjusted at any time. If not, the quality difference of the rubber parts may be produced.
When the profiled rubber extrusion is processed and formed, it has undergone tremendous suppression. Because the elasticity of the rubber is not eliminated, when forming, it will often produce extremely unstable shrinkage, which will take a period of time. Only can ease stability. Therefore, when designing rubber parts, regardless of the formula or the mold, it is necessary to carefully calculate the fit. If not, it is very easy to produce rubber parts that are unstable in size, resulting in a decrease in the quality of the rubber parts.
The special-shaped rubber extrusion processing is a raw material which is prepared by mixing rubber with a rubber raw material, and the raw material is prepared according to the characteristics of the rubber fitting, and the hardness of the required product is set. . The profiled rubber extrusion is processed and molded by a rubber flat vulcanizer. After the profiled rubber extrusion is processed and formed, it needs to be processed by flashing to smooth and smooth the surface treatment of the product.