When rubber products are molded, after large pressure pressing, custom rubber parts cannot be eliminated due to the cohesive force of the elastomer. Custom rubber parts often produce extremely unstable shrinkage when forming the mold (rubber shrinkage, due to glue Different kinds of differences), it takes a while to be gentle and stable. Therefore, when a rubber product is designed at the beginning, regardless of the formula or mold, it is necessary to carefully calculate the fit. If not, it is easy to cause the product size to be unstable, resulting in low product quality.
Rubber is a hot-melt thermosetting elastomer, and plastic is hot-melt and cold-set. Custom rubber parts rubber is different in the main body of sulfides. The temperature range of railway rubber is also quite different. It can even be affected by climate change and indoor temperature and humidity. Therefore, the production conditions of rubber products must be adjusted at any time. If not, the quality of the products may be different.
Material characteristics: non-toxic, environmentally friendly, physiologically inert, UV-resistant, custom rubber parts resistant to ozone, high and low temperature resistance (-80 to 300 degrees), high transparency, strong resilience, resistance to compression, permanent deformation, oil resistance, ozone resistance , stamping resistance, acid and alkali resistance, wear resistance, flame retardancy, voltage resistance, electrical conductivity and other properties. Scope of application: supporting electrical appliances, electronics, furniture equipment, toys, hardware, medical equipment, sporting goods, audio, lighting, machinery, automotive and other industries.