Rubber It is a heat-soluble elastomer, and plastic is a hot-melt cold-setting property. Because of the different types of sulfides, rubber has a relatively different curing temperature range, and may even change due to climate, indoor temperature or humidity. Therefore, the production conditions of rubber extrusions need to be adjusted at any time. If not, there is a possibility that the quality of the rubber extrusions will be different. The rubber extrusion is a mixed collagen material prepared from rubber raw materials and then mixed in a mixer. When the rubber is refined, it needs to be designed according to the characteristics of the rubber extrusion, and the hardness of the product needs to be determined. After the product is formed and molded, it is generally molded by a rubber flat vulcanizing machine.
When rubber extrusions are formed, they need to be pressed under very large pressure. The cohesive force of the elastomer can not be eliminated. When forming the die, it will always produce extremely unstable shrinkage. After the time, it can be gentle and stable. Therefore, whenever a rubber extrusion is designed, both the formulation and the mold need to be carefully calculated. If not, the size of the rubber extrusion is very unstable, resulting in poor quality of the rubber extrusion.
There are more and more varieties of rubber extrusions, and the standards and requirements for different products are also diversified. Generally, in this case, the quality of all rubber products is mainly determined by the purity of raw materials, product formulation, mold precision and production process. Zhenda Plastics has hundreds of unique formulations and offers the best sealing materials in harsh environments such as media erosion, extreme temperatures, ultra-high pressures and extremely stringent standards. High-performance rubber raw materials, fully automated production equipment and advanced inspection equipment provide the most favorable guarantee for the manufacture of high-quality rubber parts.